Many people have encountered this confusion: the same two cars in the same load, such as the same condition, the vehicle wear different, even the same car different drivers will also have different fuel consumption and tire wear and other problems. Many people have been looking for ways to solve and optimize these problems. Today, we will share with you the experience and tricks we have collected.

Start with the "food" of the trailer .

If the car is carrying a diesel engine, we must choose the regular gas station , not to save a little fuel cost and add inferior diesel. The quality of poor quality oil does not guarantee, burning may lead to increasing carbon accumulation in the cylinder, engine explosion, and so on. If the inferior oil impurities are more likely to block the nozzle, the cost of maintenance and replacement of the nozzle is often thousands of thousands, and the cost of fuel oil will not be lost compared with the saved fuel cost.

A secret recipe for vehicle use

First, to clean the air filter frequently, the empty filter cover of the truck is very convenient to open, and the car can be swept when the tire repair shop changes the tire. Second, if the car is a storehouse, the car can tie the side of the rear door of the car to reduce the wind resistance when it is in the empty car.

Develop good driving habits

Try to control the engine speed in a reasonable range, keep the car at a constant speed; frequent shift operation, frequent overtaking will also affect the performance of the car; before the upslope, the car is prejudged in advance to switch the past, the downhill as far as the auxiliary brake is used, and the brakes do not allow the brakes for a long time. In semi - conjugation and semi - separation state.

Pay attention to the use of tires and chassis

The tire and the chassis have an important impact on the performance of the vehicle. The general load of the vehicle is large, and the goods should be evenly distributed when loading, avoiding the situation of heavy weight and many left ones. That's why two cars in service at the same time, one in good condition after five or six years, and the other in creaking all over for two or three years. Tire specifications should be consistent, different axle tires choose the appropriate pattern; in different seasons and different weather reasonable control of tire pressure.

Maintenance is very important

One more thing is maintenance. Sharpening machine is not the wrong chopper, oil machine, filter, air filter and so on should be changed regularly, using regular products. The wear parts are lubricated in time, such as the lubrication of the cam rod must be in place, otherwise the brake will be locked, the position of the brake, the brake lag, and so on, the safety of the driving is greatly reduced, and the wear and oil consumption will increase accordingly.