CIMC 35cbm Cement Bulker Silo Trailer for Sale in Sudan

The customer ordered a 3 axle 35cbm cement bulker trailer from CIMC equipped with an engine and an air compressor.

CIMC has very rich experience in the production of silo trailer for sale, therefore, we have a detailed understanding of the customer’s needs and desired styles before confirming the order, and based on our production and service experience, we have given customers some practical suggestions.

Ultimately, the client expressed recognition of our expertise and adopted our advice. After one month of production, we produced the 35cbm silo trailer can for the customer. After inspection, customers are very satisfied.

Engine and air compressor of CIMC cement bulker trailer

Cement bulker trailer is also called silo trailer. It is mainly used for the bulk packing of powder dry materials such as fly ash, cement, lime powder, ore powder, granular alkali, aluminum powder, etc. transport. We often see cement trailer for the transportation of powdered materials at cement plants, cement warehouses and large construction sites. 

The cement bulker trailer is mainly used to transport 30 tons, 40 tons, 45 tons and 80 tons of cement. The main volumes of silo trailer for sale are 25 cubic meters, 30 cubic meters, 35 cubic meters, 38 cubic meters, 40 cubic meters, 50 cubic meters, 60 cubic meters, and 80 cubic meters.

The main assembly of the silo trailer for sale is composed of a tank body, a power system (diesel engine, air compressor), a gas circuit system, and a brake system.

CIMC 35cbm Cement Bulker Silo Trailer for Sale in Sudan

How does cement bulker unload powder materials?

1. Before unloading, check whether the unloading disc valve, external air source interface, exhaust valve and two feeding ports are closed and tightened. If they are not tightened, tighten them first to prevent air leakage;

2. Start the CIMC cement trailer engine and shift the transmission to neutral while pressing the clutch pedal to completely separate the transmission from the engine;

3. Turn on the power take-off solenoid valve switch, and slowly release the clutch pedal to rotate the air compressor.

4. Adjust the control handle of the control mechanism to adjust the speed of the air compressor to about 900r / min and stabilize it;

CIMC 35cbm Cement Bulker Silo Trailer for Sale in Sudan

5. When the pressure reaches 0.18MPa, first open the auxiliary blow pipe, then open the front and rear of 35cbm cement bulker bin discharge disc valves to start discharging, after which the pointer of the air compressor will stabilize to a certain value;

6. When the air pressure drops to 0.04Mpa, the back bin has been unloaded. Close the blower tube, open and close the back bin valve several times, and then close the back bin valve and the back bin intake valve. After which the pressure will rise and stabilize to a certain value;

7. When the pressure of the barometer reaches 0MPa, the discharge is completed, the air compressor is closed, and the discharge disc valve is closed.